Access Endpoint - Avaya Communication Manager Administrator's Manual

DIAL CODE
Enter the number you want to assign to each dial code (button). Any additions or changes apply
to all 7103A fixed feature telephones. While the system is waiting, a call progress tone receiver
is tied up, and, since there are a limited number of receivers in the system, outgoing calling
capability might be impaired.
Vector Directory Number extension can also be assigned.
Valid entries
Digits 0 to 9
* (star)
# (pound)
~p
~w
~m
~s
~W

Access Endpoint

This screen administers Access Endpoints and Wideband Access endpoints.
Note:
You can administer Wideband Access Endpoints only if, on the
Note:
System-Parameters Customer-Options screen, the Wideband Switching field
is y.
An Access Endpoint is a nonsignaling trunk that neither responds to signaling nor generates
signaling. Access Endpoints eliminate the need to dedicate an entire trunk group for the access
of a single trunk by providing the capability to assign an extension number to a single trunk.
An Access Endpoint can be specified as the Originator or Destination endpoint of an
administered connection.
A Wideband Access Endpoint (WAE) is an endpoint application connected to line-side
non-ISDN T1 or E1 facilities and, like Access Endpoints, have no signaling interface with the
system.
Usage
Up to 24 characters
Part of FAC
Part of FAC
Pause 1.5 seconds
Wait for dial tone
Mark
Start suppressing display of the digits being outpulsed
Wait indefinitely for dial tone. Use this only if network response time is
more than 30 seconds. Not available for S8300 Media Server.
Access Endpoint
Issue 2.1 May 2006 725