Avaya Communication Manager Administrator's Manual page 1652

Screen Reference
Send EMU Visitor CPN
Use this field to control which calling party identification (extension of the primary telephone or
extension of the visited telephone) is used when a call is made from a visited telephone. If you
want to use the calling party information of the primary telephone, set this field to n.
There are areas where public network trunks disallow a call if the calling party information is
invalid. In this case, there can be instances where the extension of the primary telephone is
considered invalid and the extension of the visited telephone must be used. To use the
extension of the visited telephone, set the Send EMU Visitor CPN field to y. For more
information on Enterprise user Mobility, see
Valid entries
y
n
Send Name
Appears only when the Group Type field is isdn or sip. Specifies whether the calling/
connected/called/busy party's administered name is sent to the network on outgoing/incoming
calls. Valid entries are y, n, or r (restricted). The value r indicates that the calling/connected
name will be sent by Avaya Communication Manager, but will be marked "presentation
restricted." This value is valid only if the Supplementary Service Protocol field is a (national
supplementary service), b (for called/busy only) or d for the QSIG Global Networking
Supplementary Service Protocol. When the Supplementary Service Protocol field is e (DCS
with Rerouting), only values of y and n are permitted.
Note:
If name information is not administered for the calling station or the connected/
Note:
called/busy station, the system sends the extension number in place of the name.
Short Holding Threshold
This field appears when the ACA Assignment field is y.
Valid entries
0 to 30
1652 Administrator Guide for Avaya Communication Manager
Usage
Sends calling party identification information on the extension of the EMU
user's telephone.
Sends calling party identification information on the primary telephone.
Usage
Enter the number of times the system will record a short holding call
before alerting an attendant to the possibility of a faulty trunk. Enter 0 for
no short holding calls.
Setting Up Enterprise Mobility User on page 166.