Avaya Communication Manager Administrator's Manual page 726

Screen Reference
The WAE is defined by a starting port (DS0) and a width specifying the number of adjacent
nonsignaling DS0s (positioned within a DS1 facility) that make up the endpoint. This width can
be between 2 and 31 adjacent DS0s.
Note:
Access Endpoints and Wideband Access Endpoints consume the same
Note:
resources that trunks use. Thus, the sum of Access Endpoints and trunks cannot
exceed the maximum number of trunks available in your system configuration.
Field descriptions for page 1
Figure 291: Access Endpoint screen
add access-endpoint next
Communication Type: voice-grade-data
Communication Type
Valid entries
voice-grade-data
56k-data
64k-data
wideband
726 Administrator Guide for Avaya Communication Manager
ACCESS ENDPOINT
Extension: 30001
COR: 1
TN: 1
Usage
For an analog tie trunk access endpoint.
For a DS1 access endpoint enter as appropriate (64k-data is not allowed
for robbed-bit trunks).
For a Wideband access endpoint
(Starting) Port:_______
Name:_____________
COS: 1
ITC: restricted
Page 1 of x