Avaya Communication Manager Administrator's Manual page 1468

Screen Reference
Note:
To set up paging on an H.248 gateway, connect the paging system to a port on an
Note:
MM711 and administer the port as an analog station on the Station screen. No
entries on the Loudspeaker Paging screen are required.
Precedence Call Waiting
Valid entries
y/n
R Balance Network
Valid entries
y
n
Recall Rotary Digit
This field only appears if type is 500 or 2500.
Valid entries
y/n
1468 Administrator Guide for Avaya Communication Manager
Usage
Enter y to activate Precedence Call Waiting for this station.
Usage
Enter y to select the R Balance Capacitor network. In all other cases except
for those listed under n, enter y.
Enter n to select the standard resistor capacitor network. You must complete
this field if Off-Premise Station is y. Enter n when the station port circuit is
connected to terminal equipment (such as SLC carriers or impedance
compensators) optioned for 600-ohm input impedance and the distance to
the equipment from the system is less than 3,000 feet.
Usage
Enter y to allow the user of a rotary telephone to dial the administered
Recall Rotary Digit to receive recall dial tone. This will enable this user to
perform conference and transfer operations.
You establish the Recall Rotary Digit on the
Parameters screen.
Feature-Related System