Avaya Communication Manager Administrator's Manual page 1577

Figure 579: 8400-Series Terminal Parameters screen
change terminal-parameters
Note: Location-parameters forms assign terminal parameter sets.
OPTIONS*
PRIMARY LEVELS*
Touch Tone Transmit (dB): _____*
ADJUNCT LEVELS*+
BUILT-IN SPEAKER LEVELS
8403 BUILT-IN SPEAKER LEVELS
Base Parameter Set
Determines which default set of telephone options and levels will be used. This field
corresponds to the country codes. For the country code listing, see the
page 1514.
Customize Parameters
Indicates whether the administrator wishes to change one or more of the default parameters.
Note:
Beginning with the May 2004 2.1 Release of Communication Manager, when the
Note:
Customize Parameters field on the Terminal Parameters n screen is set to y,
all Base Parameter Set default values display in the parameter fields. You must
change the values in fields for which the default is not desired. To change just a
few parameters back to default values, temporarily set the Customize
Parameters field on the Terminal Parameters n screen to n, but do not submit
the screen (do not press Enter). Make note of the default values for the specific
fields you want to change, then set the Customize Parameters field back to y,
and enter the default values in the fields.
8400-TYPE TERMINAL PARAMETERS
Base Parameter Set: __
Display Mode: _*
Voice Transmit (dB): _____*
Voice Receive (dB): _____*
Voice Transmit (dB): _____*
Voice Sidetone (dB): _____*
Voice Transmit (dB): _____*
Voice Receive (dB): _____*
Customize Parameters? _
DLI Voltage Level: _________*
Voice Sidetone (dB): _____*
Touch Tone Sidetone (dB): _____*
Voice Receive (dB): _____*
Touch Tone Sidetone (dB): _____*
Voice Receive (dB): _____*
Touch Tone Sidetone (dB): _____*
Touch Tone Sidetone (dB): _____*
Country code table
Issue 2.1 May 2006
Terminal Parameters
Page 3 of x
on
1577