Avaya Communication Manager Administrator's Manual page 1143

Receive Buffer TCP Window Size
Valid entries
512 to 8320
Shared Virtual Address
This field appears when Critical Reliable Bearer is y.
Valid entries
0 to 255
Slot
Displays the slot location entered in the command line. Enter the location of the second
TN2602AP circuit pack for a non-duplicated board. The second (right-side) Slot field is
automatically populated when Critical Reliable Bearer is y.
Note:
The 4606, 4612, and 4624 telephones do not support the bearer duplication
Note:
feature of the TN2602AP circuit pack. If these telephones are used while an
interchange from active to standby media processor is in process, calls might be
dropped.
Valid entries
01 to 03 (DEFINITY CSI) or
1 to 64 (S8700/S8300 Media Servers)
A to E
0 to 20
Usage
Number of unacknowledged messages allowed. This field should be set
to 512. .
Usage
The virtual IP address shared by the two TN2602AP circuit packs, when
duplicated. This address enables Communication Manager to connect
endpoints through the TN2602AP circuit packs to the same address,
regardless of which one is actually active.
Note: The 4606, 4612, and 4624 telephones do not support the bearer
duplication feature of the TN2602AP circuit pack. If these telephones are
used while an interchange from active to standby media processor is in
process, calls might be dropped.
Usage
First and second characters are the cabinet number.
Third character is the carrier.
Fourth and fifth character are the slot number.
IP Interfaces
Issue 2.1 May 2006 1143