Avaya Communication Manager Administrator's Manual page 1146

Screen Reference
Virtual MAC Address Table
Valid entries
1 through 4
VLAN
This field sends VLAN instructions to the PROCR (S8300/S8700 Media Servers), CLAN, and
Media Processor boards. It does not send VLAN instructions to IP endpoints such as IP
telephones and softphones. This field cannot be administered for VAL boards.
Valid entries
0 to 4095
n
VOIP Channels
Valid entries
0 (will not support voice calls)
80 (low density)
320 (standard)
1146 Administrator Guide for Avaya Communication Manager
Usage
Enter the table number from which the virtual MAC address, shared by
duplicated TN2602AP circuit packs, will be obtained. Default is 1.
Note: The 4606, 4612, and 4624 telephones do not support the bearer
duplication feature of the TN2602AP circuit pack. If these telephones are
used while an interchange from active to standby media processor is in
process, calls might be dropped.
Usage
Specifies the virtual LAN value.
Disabled. This is the default.
Usage
This field indicates the number of VoIP channels that are
allocated to the associated TN2602. This VoIP channel
capacity is an administered value. Users will be blocked from
administering 80 or 320 VoIP channels if there is no available
capacity for the corresponding Maximum TN2602 boards
with 80 VoIP Channels / Maximum TN2602 boards with
320 VoIP Channels license features. Default is 0. This
number also applies to the second TN2602AP circuit pack
when Critical Reliable Bearer is y.
Note: The 4606, 4612, and 4624 telephones do not support
the bearer duplication feature of the TN2602AP circuit pack.
If these telephones are used while an interchange from active
to standby media processor is in process, calls might be
dropped.