Avaya Communication Manager Administrator's Manual page 1654

Screen Reference
Start Position
The value administered in this field must be coordinated with your central office. This field
appears when the Country field is 15 and the Shuttle field is y.
Valid entries
1 to 9
Suppress # Outpulsing
Valid entries
y/n
Time (sec) to Drop Call on No Answer
This field appears if the Group Type field is co or diod and the Outgoing Dial Type field is mf,
or if the Group Type field is co, diod, fx, or wats and the Country field is 15.
Valid entries
0 to 1200
Used for DCS
Valid entries
y/n
Note:
This field cannot be activated if the trunk group number is greater than 255 or if
Note:
the Trunk Access code is more than 3-digits long.
1654 Administrator Guide for Avaya Communication Manager
Usage
Indicate which digit in the digit string is considered to be the "previously
sent" digit (see Start B Signal
Usage
Enter y if end-to-end signaling begins with (and includes) "#". The final "#"
is suppressed in cases where the system would normally outpulse it. This
field should be y when the Central Office (for example, rotary) or any
other facility treats "#" as an error.
Usage
Enter the duration (in seconds) Communication Manager should wait for
outgoing calls to be answered. If the call is not answered in the specified
number of seconds, the call drops. If this field is 0, the timer is not set and
no calls drop.
Usage
Enter y if this trunk group will send and receive messages on a DCS
signaling link.
on page 1653).