Avaya Communication Manager Administrator's Manual page 1073

Announcement Ports
This field appears only when the Announcement Type field is voice-synthesis. For the
voice-synthesis announcement type, this indicates the equipment location of two ports on the
voice synthesizer circuit pack. Enter the necessary characters.
Valid entries
01 to 03 (DEFINITY CSI) or
1 to 64 (S8700/S8300 Media Servers)
A to E
0 to 20
01 to 04 (Analog TIE trunks)
01 to 31
1 to 80 (DEFINITY CSI) or
(S8700/S8300 Media Servers)
V1 to V9
01 to 31
Announcement Type
This indicates the type of automatic wakeup announcement the hotel guest will receive.
Allowable entries are as follows:
Valid entries
external
integrated
Usage
Applicable when using an announcement adjunct.
If external is used, complete the Auxiliary Board for Announcement
field.
Applicable when using the TN750B or TN750C announcement circuit
pack.
If integrated is used, complete the Integrated Announcement
Extension field. The extension you enter must be a valid integrated
announcement extension (administered on the Recorded
Announcements screen) or a VDN.
Usage
First and second characters are the cabinet
number
Third character is the carrier
Fourth and fifth character are the slot number
Six and seventh characters are the circuit number
Gateway
Module
Circuit
Hospitality
1 of 2
Issue 2.1 May 2006 1073