Avaya Communication Manager Administrator's Manual page 1074

Screen Reference
Valid entries
mult-integ
voice-synthesis
music-on-hold
silence
Automatic Selection of DID Numbers
This field assigns a 2 to 5-digit number to a guest's telephone number that is not associated
with the room number.
Valid entries
y/n
Auxiliary Board for Announcement
This field appears only when the Announcement Type field is external. This indicates the
equipment location of an auxiliary trunk circuit that connects to the external announcement
equipment. Enter the necessary characters.
Valid entries
01 to 03 (DEFINITY CSI) or
1 to 64 (S8700/S8300 Media Servers)
A to E
0 to 20
01 to 04 (Analog TIE trunks)
01 to 31
1 to 80 (DEFINITY CSI) or
1 to 250 (S8700/S8300 Media Servers)
V1 to V9
01 to 31
1074 Administrator Guide for Avaya Communication Manager
Usage
Multi-integrated; applicable when using the TN750B or TN750C
announcement circuit pack. mult-integ allows the automatic wakeup
feature to use integrated announcement circuit packs to play any one of
multiple announcements to different extensions during a wakeup call.
If mult-integ is used, complete the Default Announcement Extension
field. The extension you enter must be a valid integrated announcement
extension (administered on the Recorded Announcements screen) or a
VDN.
If voice-synthesis is used, complete the Announcement Ports field.
If music-on-hold is used, no other field appears.
If silence is used, no other field appears.
Usage
Enter y to use the Automatic Selection of DID Numbers for Guest Rooms
feature.
Usage
First and second characters are the cabinet
number
Third character is the carrier
Fourth and fifth character are the slot number
Six and seventh characters are the circuit number
Gateway
Module
Circuit
2 of 2