Avaya Communication Manager Administrator's Manual page 1159

Conversion to Full Public Number - Insert
Valid entries
up to 13 digits
Incoming LDN Extension
Valid entries
Valid unused
extension
Maximum Number of Trunks to Use
It is necessary to impose a limit on the trunk usage in a particular PN/MG in a network region
when IGAR is active. The limit is required because if there is a major IP WAN network failure, it
is possible to use all trunks in the network region(s) for IGAR calls.
Valid entries
1 to 999, or blank
Note:
The S8500 supports up to 800 IP trunks (via license file limitations), which is less
Note:
than the S8700 limit, but the overall maximum number of trunk members is the
same as on the S8700: 8000.
BACKUP SERVERS IN PRIORITY ORDER
This section lists the backup server names in priority order. Backup server names should
include LSP server names, but should not include ESS server names.
Usage
Enter up to 13 digits to insert, or blank. International numbers should
begin with '+' .
Note: The optional "+" at the beginning of the inserted digits is an
international convention indicating that the local international access code
(e.g., 011 in North America and 00 in Europe) must be dialed before the
number.
Usage
Assign an unused Listed Directory Number for incoming IGAR calls.
Usage
Enter the maximum number of trunks to be used for alternate routing.
IP Network Region
Issue 2.1 May 2006 1159