Cyclical Hunt
When a call is offered to a trunk group, Communication Manager searches for an available
trunk. This field, which appears when the Direction field is two-way and the Trunk Type field is
loop-start, controls the starting point of this search.
You can change this field from n to y at any time. To change from y to n, however, all the trunks
in the group must be idle or busied out.
Valid entries
y
n
Dial Detection
Applies only to TN2199 ports. The Country field must be 15.
Valid entries
A-wire
B-wire
Digital Loss Group
This field determines which administered 2-party row in the loss plan applies to this trunk group
if the call is carried over a digital signaling port in the trunk group.
Valid entries
1 to 19
Usage
Enter y to have Communication Manager start its search from the last trunk
seized. This method is faster, and thus better suited for high-traffic trunk
groups.
Enter n to have Communication Manager start each search at member 1
(the first trunk administered on the Group Member Assignments page).
Usage
Usage
Shows the index into the loss plan and tone plan.
Trunk Group
Issue 2.1 May 2006
1621