Avaya Communication Manager Administrator's Manual page 1310

Screen Reference
Collect All Digits Before Seizure
Appears when the Outgoing Call Type is group-ii-mfc or mfe.
Valid entries
y
n
Convert First Digit End-of-Dial To
Appears when the Private Group II Permissions and Public Interworking field is y.
Valid entries
0 to 9, #, or blank
Forward Cycle Timer (sec)
Appears when the Incoming Call Type field is mfe.
Valid entries
1 to 255
Group II Called Party Category
Appears when the Outgoing Call Type field is group-ii-mfc and the Use COR for All Group II
Responses field is n. Enter the type of group II signals that should be used on the outgoing
R2-MFC call.
1310 Administrator Guide for Avaya Communication Manager
Usage
The system collects all the digits before seizing the trunk and the ANI Req
field on the AAR and ARS Digit Conversion Table does not apply.
Enter n to control ANI collection via the ARS screens.
Usage
Enter the digit used when the incoming initial end-of-ani or end-of-dial MF
signal is converted on a per-switch basis.
Usage
Enter the number of seconds to wait to receive the check frequency after
sending an MFE signal. Communication Manager drops the call if the time
runs out before it receives check frequency.