Avaya Communication Manager Administrator's Manual page 1620

Screen Reference
Bit Rate
This field specifies the baud rate to be used by pooled modems. This field appears when the
Comm Type field is avd or rbavd. It also appears if the Comm Type field is data, but only if the
ISDN-PRI field is y on the System-Parameters Customer-Options screen.
Valid entries
300
1200
2400
4800
9600
19200
Call Still Held
This field appears if the Group Type field is co or fx. This field is used when the receiving end
media server or switch initiates the disconnection of incoming calls. It effectively extends the
Incoming Glare Guard timer by 140 seconds. This field affects only TN438B, TN465B, and
TN2147 ports and is used primarily when the Country Code field is 2.
Valid entries
y/n
Cut-Through
This field appears when the Outgoing Dial Type field is either rotary or tone.
!
SECURITY ALERT:
Entering y in this field will reduce your ability to prevent toll fraud.
SECURITY ALERT:
Valid entries
y
n
1620 Administrator Guide for Avaya Communication Manager
Usage
Enter the speed of the fastest modem that will use this trunk group.
Usage
Enter y to prevent glare by delaying an outgoing seizure of a trunk for at
least 140 seconds after it is released from an incoming call.
Usage
Enter y to allow users to get dial tone directly from the central office.
Outgoing calls over this trunk group will bypass AAR/ARS (if you're using
it) and any of your administered restrictions (such as COR or FRL).
Enter n and the user will receive switch dial tone. Instead of digits being
sent to the central office, they will be collected and checked against
administered restrictions. If no restrictions apply, the digits are sent to the
central office.