Avaya Communication Manager Administrator's Manual page 1144

Screen Reference
Subnet Mask
The subnet mask is a 32-bit binary number that divides the network ID and the host ID in an IP
address.
Valid entries
characters
Target socket load
This field appears when Type is procr. Use this field for load balancing endpoint traffic across
multiple IP interfaces. The value that you enter in the Target socket load field controls the
percentage of sockets allocated to each IP interface within the same Gatekeeper Priority. When
all the IP interfaces within the same Gatekeeper Priority exceeds the target number that you
allocate, the system continues to add sockets until the interface is at its maximum capacity. For
more information on load balancing, see
Note:
The 4606, 4612, and 4624 telephones do not support the load balancing feature
Note:
of the TN2602AP circuit pack.
Valid entries
1 to platform maximum as follows:
S8700 series: 3500
●
S8500: 3500
●
S8400: 2500
●
CHAWK/BOXTER: 2000
●
VM/BLADE: 1700
●
Target socket load and Warning level
This field appears when Type is clan. The value that you enter in the Target socket load and
Warning level field controls the percentage of sockets allocated to each IP interface within the
same Gatekeeper Priority. When all the IP interfaces within the same Gatekeeper Priority
exceeds the target number that you allocate, the system continues to add sockets until the
interface is at its maximum capacity. If the targeted percentage is exceeded on a CLAN, a
warning alarm is generated.
1144 Administrator Guide for Avaya Communication Manager
Usage
Enter the Subnet Mask for TN2602AP. This entry also applies to the
second TN2602AP circuit pack when Critical Reliable Bearer is y.
Note: The 4606, 4612, and 4624 telephones do not support the bearer
duplication feature of the TN2602AP circuit pack. If these telephones are
used while an interchange from active to standby media processor is in
process, calls might be dropped.
Using load balancing
Usage
Enter the maximum number of sockets targeted for this
interface. The default is 80% of the platform maximum.
on page 586.