Avaya Communication Manager Administrator's Manual page 1162

Screen Reference
codec-set
Indicates which codec set is to be used between the two regions.
.
Valid entries
1 to 7, pstn
direct-WAN
The entry in this field indicates whether the two regions (source and destination) are directly
connected by a WAN link.
Valid entries
y/n
dst rgn
The entry in this field identifies the destination region for this inter-network connection.
Valid entries
1 to 250
Dynamic CAC Gateway
This field only appears if the Audio WAN-BW- limit field is set to dynamic. The gateway must
be configured to be a CAC (Call Admission Control) gateway.
.
Valid entries
1 to 250
1162 Administrator Guide for Avaya Communication Manager
Usage
If the two regions are not connected at all, this field should be blank.
When the codec set is blank, the direct-WAN, WAN-BW-limits, and
Intervening-regions entry fields are not displayed. This field cannot be
blank if this route through two regions is being used by some
non-adjacent pair of regions.
Usage
The default value is y(es) if the codec-set field is not blank. If so, the
WAN-BW-limits field displays, but the Intervening-regions fields do not.
If the direct-WAN field is set to n(o), then the WAN-BW-limits field does
not display, but the Intervening-regions fields are displayed.
Usage
Display-only. Shows the destination region for this inter-network
connection.
Usage
Set the gateway that reports the bandwidth-limit for this link. Default is
blank.