Avaya Communication Manager Administrator's Manual page 1474

Screen Reference
Special Dialing Option
This field identifies the type of dialing for calls when this data module originates calls.
Valid entries
hot-line
default
blank
SPID — (Service Profile Identifier)
Enter a variable length parameter. This field appears only if the Endpt Init field is y.
The SPID is a numeric string, which means that the value of 00 is different from 000. The SPID
must be different for all terminals on the BRI and from the Service SPID. The SPID should
always be assigned. If the SPID is not assigned for the first BRI on a port, any other BRI
assignment to that port are blocked.
Note:
If you have set the Port field to X for an ISDN-BRI extension and intend to use
Note:
Terminal Translation Initialization (TTI) to assign the port, then the SPID number
must equal the station number.
Survivable COR
This field is for all analog and IP station types. Use this field to set a level of restriction for
stations to be used in conjunction with the survivable dial plan in order to limit certain users to
only to certain types of calls. The restriction levels are listed in order from most restrictive to
least restrictive. Each level assumes the calling ability of the ones above it.
Valid entries
emergency
internal
local
toll
unrestricted
1474 Administrator Guide for Avaya Communication Manager
Usage
For regular (normal) keyboard dialing.
Usage
This station can only be used to place emergency calls which are defined.
This station can only make intra-switch calls. This is the default.
This station can only make calls that are defined as locl , op, svc, or
hnpa in the Survivable ARS Analysis Table
This station can place any national toll calls which are defined as fnpa or
natl on the Survivable ARS Analysis Table.
This station can place a call to any number defined in the Survivable
ARS Analysis Table. Those strings marked as deny are also denied to
these users as well.