Avaya Communication Manager Administrator's Manual page 1203

Codeset to Send National IEs
This field defines the codeset for sending the information element (IE) for national IEs. National
IEs include all IEs previously sent only in code set 6 (such as DCS IE). Now these national IEs,
including Traveling Class Marks (TCMs) and Lookahead Interflow (LAI), can be sent in code set
6 or 7. The value depends on the type of server/switch the user is connected to.
Valid entries
6
7
Note:
A Traveling Class Mark (that is, the user's FRL or the user's trunk group FRL) is
Note:
passed between tandem nodes in an ETN in the setup message only when the
Service Type field is tandem. It then is used by the distant tandem switch to
permit access to facilities consistent with the originating user's privileges.
Digit Handling (in/out)
This field defines whether overlap receiving and overlap sending features are enabled.
Valid entries
enbloc/enbloc
enbloc/overlap
overlap/enbloc
overlap/overlap
Without overlap receiving or sending enabled, the digits on incoming and outgoing calls are
sent enbloc. If the Digit Handling field is overlap/enbloc or overlap/overlap, the following
results:
Incoming Call Handling Treatment table does not appear
●
The Digit Treatment and Digits fields appear
●
Warning message indicates that all Incoming Call Handling entries are removed when
●
screen is submitted
When screen is submitted with these values, all Incoming Call Handling entries are
●
removed
Usage
Other types.
System 85 R2V4, 4E11, or newer media server/switch types
Usage
Set the field to overlap when you want overlap receiving or overlap
sending. Set to enbloc when you do not want these features enabled.
The first field value indicates digit receiving and the second value
indicates digit sending.
ISDN Trunk Group
Issue 2.1 May 2006 1203