Avaya Communication Manager Administrator's Manual page 1646

Screen Reference
Network Call Redirection
Valid entries
deflect
ANSI-transfer
Nortel-transfer
telcordia-tbct
Outgoing ANI
If this trunk group is used for an outgoing call with ANI, the entry in this field overrides the
normal ANI. The ANI is sent exactly as administered, except for the normal truncation to 7 digits
for Russian ANI. This ANI override works both for calls originated in Avaya Communication
Manager and calls tandemed through it. This field appears for CO, DIOD, FX, and WATS trunk
groups.
Valid entries
1 to 15 digits
blank
Path Replacement Method
Appears when the following fields are set on the Trunk Group screen: trunk Group Type is
ISDN, Supplementary Service Protocol is b or e, the Path Replacement with Retention is n,
and the Supplementary Services with Rerouting field or the DCS with Rerouting field on the
System-Parameters Customer-Options
Valid entries
always
BR
(better route)
1646 Administrator Guide for Avaya Communication Manager
Usage
Use to allow Network Call Deflection.
Use to allow Network Call Transfer for MCI DEX 600 ISDN trunks.
Use to allow Network Call Transfer for MCI DMS 250 switches.
Use to allow Network Call Transfer for Lucent 5ESS or Nortel DMS100
switches.
Usage
Enter the digit string to be sent in place of normal ANI.
Leave this field blank to allow ANI to work normally.
screen is y.
Usage
Use any QSIG (SSB) trunk group as the replacement trunk group. A new
call is always originated, even when the original trunk group is determined
to be the replacement trunk group.
Route pattern preferences help determine trunk group path replacement.
The original trunk group is retained if the Path Replacement with
Retention field is y. Path replacement fails (and the original trunk group is
retained) if the Path Replacement with Retention field is n.