Avaya Communication Manager Administrator's Manual page 1140

Screen Reference
Allow H.323 Endpoints
This field controls whether or not IP endpoints can register on the interface.
Valid entries
y/n
Code/Sfx
Valid entries
y/n
Critical Reliable Bearer
Appears when the board code of slot location is TN2602.
Valid entries
y/n
1140 Administrator Guide for Avaya Communication Manager
Usage
On a simplex main server, enter y to allow H.323 endpoint connectivity to
the PE interface. Enter n if you do not want H.323 endpoint connectivity to
the PE interface.
Note: For an Enterprise Survivable Server (ESS), this field is display-only
and is set to n. H.323 endpoint connectivity using the PE interface on an
ESS server is not supported. For a Local Survivable Processor (LSP), this
field is display-only and is set to y. For more information, see
Processor Ethernet on page 576.
Usage
Circuit pack TN code and suffix. Display-only for TN2602AP when
Critical Reliable Bearer is n. The second (right-side) Code/Sfx field is
automatically populated based on the corresponding Slot field
information, when Critical Reliable Bearer is y.
Note: The 4606, 4612, and 4624 telephones do not support the bearer
duplication feature of the TN2602AP circuit pack. If these telephones are
used while an interchange from active to standby media processor is in
process, calls might be dropped.
Usage
A y entry indicates that two TN2602AP circuit packs are duplicated in a
port. If y, a second column of information appears, for administering the
second shared circuit pack. Default is n.
Note: The 4606, 4612, and 4624 telephones do not support the bearer
duplication feature of the TN2602AP circuit pack. If these telephones are
used while an interchange from active to standby media processor is in
process, calls might be dropped.
Setting up