Avaya Communication Manager Administrator's Manual page 1289

Restrict From Time and Restrict to Time
These two fields are separated by colons, for example, hh:mm where hh = hour and mm =
minute. Periods that span an interval that crosses a day boundary are specified by setting the
Restrict From Time field greater than the Restrict To Time field. For example, a Restriction
From Time of 17:00 and a Restrict To Time of 08:00 limits access to the traditional working
hours, 8 to 5.
When used with the Restrict Days of Week field, overnight periods start on the days where
access is not restricted by the Restrict Day of Week field.
If the Restrict Days of Week field is not specified, the restricted time interval specified by the
Restrict From Time to Restrict To Time fields applies to every day of the week.
Valid entries
00:00 to 23:59
Secret Key
The value of this field is only displayed during the initial add or change login command to
allow it to be programmed into any ASG Site Manager, ASG Mobile, or ASG Pass-Key used to
interact with ASG for user authentication.
If the System Generated Secret Key field is set to y, the system generates the secret key. If
the System Generated Secret Key field is set to n, the administrator is required to enter a
20-digit octal value. It is important to note the value of the secret key so you can enter it into
response generation devices.
Valid entries
20-digit octal string using
0 to 7 as possible digits
System Generated Secret Key
Valid entries
y/n
Usage
Enter the time interval each day the login ID is blocked from accessing the
system via the ASG interface.
Usage
Enter the 20-digit octal value used by both the lock and the key to
verify user authenticity. The last digit must be 0 and the second to
last digit must be either 0, 2, 4, or 6.
Usage
Enter y to generate the secret key by the system and display it to the
administrator.
Login Administration
Issue 2.1 May 2006 1289