Avaya Communication Manager Administrator's Manual page 1615

Valid entries Usage
tgi Enter tgi at to administer a two-way tie trunk group between 2 satellites
(for internal or between the main server and a satellite. (This trunk group should be
trunks) administered as tgi on both servers.)
DIOD trunks support pulsed and continuous E&M signaling in Brazil and discontinuous E&M
signaling in Hungary. Use the following entries for DIOD trunks. Use these values only when
all trunk group members are assigned to a TN464F (or later version) or TN2464 circuit pack.
cont Enter cont for continuous E&M signaling.
pulsed Enter pulsed for pulsed E&M signaling.
discont Leave blank forR2 signaling.
Hungary uses discontinuous E&M signaling when this field is dis. Brazil
E&M trunks use continuous and pulsed E&M.
Trunk Group
2 of 2
Issue 2.1 May 2006 1615