Avaya Communication Manager Administrator's Manual page 1465

Off Premises Station
Analog telephones only.
Valid entries
y
n
PCOL/TEG Call Alerting
Appears only for 510 telephones.
Valid entries
y/n
Per Button Ring Control
Valid entries
y
n
Personalized Ringing Pattern
Personalized Ringing allows users of some telephones to have one of 8 ringing patterns for
incoming calls. Users working closely in the same area can each specify a different ringing
pattern. This enables the users to distinguish their own ringing telephone from other telephones
in the same area. For virtual stations, this field dictates the ringing pattern on its mapped-to
physical telephone.
Usage
Enter y if this telephone is not located in the same building with the
system. If you enter y, you must complete R Balance Network.
Enter n if the telephone is located in the same building with the system.
Usage
Enter y to alert the station for Personal CO Line/Terminating Extension
Group calls.
Usage
Enter y to allow users to select ring behavior individually for each
call-appr, brdg-appr, or abrdg-appr on the station and to enable Automatic
Abbreviated and Delayed ring transition for each call-appr on the station.
Also, enter y if you do not want the system to automatically move the line
selection to a silently alerting call unless that call was audibly ringing
earlier.
Enter n if you want calls on call-appr buttons to always ring the station
and calls on brdg-appr or abrdg-appr buttons to always ring or not ring
based on the Bridged Call Alerting field value.
Also, enter n if you want the system to move line selection to a silently
alerting call if there is no call audibly ringing the station.
Station
Issue 2.1 May 2006 1465