Avaya Communication Manager Administrator's Manual page 1011

No Hold Conference Timeout
Controls the timeout of No Hold Conference call setup. The system Answer Supervision timer
should be set to a value less than this.
Valid entries
20 to 120
Select Line Appearance Conferencing
Use this field to specify that the user can use the line appearance rather than the Conf button to
include a call in a conference. If a user is on a call, and another line is on hold or an incoming
call alerts on another line, the user can press the Conf button to bridge the calls together. Using
the select line appearance capability, the user can press a line appearance button to complete a
conference instead of pressing the Conf button a second time.
Valid entries
y/n
Transfer Upon Hang-Up
Allows DCP, hybrid, IP, wireless, or ISDN-BRI telephone users to complete a transfer operation
by hanging up.
Valid entries
y/n
Unhold
Allows the user to press the hold button on a telephone to release a hold (if no other line
appearance is on hold or alerting). This does not apply to BRI telephones or attendant consoles.
Valid entries
y/n
Usage
Enter the number of seconds.
Usage
Enter y to activate Select Line Appearance Conferencing
Usage
Enter y so users can transfer a call by pressing the Transfer button,
dialing the desired extension, and then hanging up. The user can also
wait to hang up, speak with the other party, then press Transfer again to
complete the process. With this field set to y, users of the Call Park FAC
can park a call without having to press the Transfer button a second time.
Usage
Enter y to activate the unhold capability
Feature-Related System Parameters
Issue 2.1 May 2006 1011