Avaya Communication Manager Administrator's Manual page 1441

!
CAUTION:
When a DCP telephone is unplugged and moved to another physical location, the
CAUTION:
Emergency Location Extension field must be changed for that extension or the
USA Automatic Location Identification data base must be manually updated. If
the Emergency Location Extension field is not changed or if the USA
Automatic Location Identification data base is not updated, the DID number sent
to the Public Safety Network could send emergency response personnel to the
wrong location.
Valid entries
always
once
no
done
error
Auto Select Any Idle Appearance
Valid entries
y/n
Usage
Enter always and the DCP telephone can be moved anytime without
additional administration by unplugging from one location and plugging
into a new location.
Enter once and the DCP telephone can be unplugged and plugged into a
new location once. After a move, the field is set to done the next time that
routine maintenance runs on the DCP telephone.
Use once when moving a large number of DCP telephones so each
extension is removed from the move list. Use once to prevent automatic
maintenance replacement.
Enter no to require administration in order to move the DCP telephone.
Done is a display-only value. Communication Manager sets the field to
done after the telephone is moved and routine maintenance runs on the
DCP telephone.
Error is a display-only value. Communication Manager sets the field to
error, after routine maintenance runs on the DCP telephone, when a
non-serialized telephone is set as a movable telephone.
Usage
Enter y to allow automatic selection of any idle appearance for transferred
or conferenced calls. Communication Manager first attempts to find an
idle appearance of the call being transferred or conferenced. If that
attempt fails, Communication Manager selects the first idle appearance.
Station
Issue 2.1 May 2006 1441