Avaya Communication Manager Administrator's Manual page 1378

Screen Reference
Interface Link
This field identifies the physical link carrying this processor (virtual) channel.
Valid entries
1 to 99
p (processor)
blank
Mach ID
Valid entries
1 to 63 for MWI,
1 to 63 for DCS,
1 to 99 for AUDIX,
or blank
Mode
Valid entries
c(lient)
s(erver)
blank
Proc Chan
This display-only field shows the number assigned to each processor channel you administer.
Range is from 1 to 384.
1378 Administrator Guide for Avaya Communication Manager
Usage
Enter the physical link carrying this processor (virtual) channel. Links
numbered 1 through (4 times the number of PI circuit packs) for the si
model can be either x.25 or tcp/ip. The rest of the links (up to 25) must be
tcp/ip.
Enter p to use the Communication Manager's Processor Ethernet
interface for adjunct connectivity.
Usage
Enter the destination server ID defined on the dial plan of the
destination server.
Usage
Indicate whether the IP session is passive (client) or active (server). This
field must be blank if the interface link is x.25 or procr-intf. This field
cannot be blank if the type of interface link is ethernet or ppp.