Trunk Group - Avaya Communication Manager Administrator's Manual

Screen Reference

Trunk Group

Use the Trunk Group screen to set basic characteristics for every type of trunk group and to
assign ports to the group. This section lists and describes all the fields you might see on the
screen. Many fields are dependent on the settings of other fields and only appear when certain
values are entered in other fields on the screen. For example, the entry in the Group Type field
might significantly change the content and appearance of the Trunk Group screen.
For more information on administering trunk groups, see
Note:
This section does not cover ISDN trunks. For descriptions of the screens and
Note:
fields that are unique to ISDN trunks, see
Field descriptions for page 1
The figure below is only an example, and is intended to show most of the fields that might
appear on page 1 of the Trunk Group screen. This example might not show all fields, or might
show fields that normally do not appear together; it is not intended to reflect a specific trunk
group type. Your own screen might vary from this example according to specific field and
system settings. The list of field descriptions that follows the figure is in alphabetical order for
quick reference. This list is intended to be comprehensive, and might include information on
fields that are not shown in the example. The field descriptions identify fields that are specific to
particular trunk group types.
Figure 587: Trunk Group screen - page 1
add trunk-group next
Group Number: 1
Group Name: OUTSIDE CALL
Direction: two-way
Dial Access? n
Queue Length: 0
Comm Type: voice
Prefix-1? y
1598 Administrator Guide for Avaya Communication Manager
Country: 1
Trunk Type:
Managing Trunks
ISDN Trunk Group
TRUNK GROUP
Group Type: co
COR: 1
Outgoing Display? n
Busy Threshold: 255
Auth Code? n
Trunk Flash? n
on page 461.
on page 1195.
Page
CDR Reports: y
TN: 1 TAC:
Night Service:
Incoming Destination:
Digit Absorption List:
Toll Restricted? y
1 of x