Avaya Communication Manager Administrator's Manual page 1444

Screen Reference
Button Assignments
Enter the abbreviated software name to assign a feature button. For a list of feature buttons,
see the table,
Note:
If you want to use Terminal Translation Initialization (TTI), you must assign a call
Note:
appearance (call-appr) to the first button position. TTI needs the button on the
first call appearance to get dial tone.
Cable
You can use this field to identify the cable that connects the telephone jack to the system. You
also can enter this information in the Blank column on the Port Assignment Record.
Caller ID Message Waiting Indication
Appears when the Type field is CallrID. For CallrID type telephones or analog telephones with
Caller ID adjuncts only.
Valid entries
y/n
Note:
The Caller ID Message Waiting Indication administration is independent of the
Note:
administration of LED or NEON-lamp Avaya Communication Manager Message
Waiting Indication (MWI). For example, it is possible to administer a Caller ID
telephone with the Caller ID Message Waiting Indication field set to n and the
Message Waiting Indicator field set to neon.
Calls Allowed
Appears if the XMOBILE Type field is EC500 and the Mapping Mode field is termination or
both. Used to identify the Extension to Cellular call filter type for an XMOBILE station. This field
allows an XMOBILE station to function as a bridge and still be restricted.
Valid entries
internal
external
1444 Administrator Guide for Avaya Communication Manager
Telephone Feature Buttons Table
Usage
Enter y to allow aliasing of various non-Avaya telephones and adjuncts.
Usage
External calls are blocked. Internal calls terminate to the XMOBILE
station. Attendant-originated and attendant-delivered calls are not
delivered
Internal calls are blocked. External calls terminate to the XMOBILE
station.
on page 132.