Avaya Communication Manager Administrator's Manual page 1702

Screen Reference
Return Destination
When Meet-me Conferencing is n, an asterisk (*) appears next to the field name, indicating
that this field follows VDN override rules when the system changes the "active" VDN for a call.
Valid entries
VDN extension
or blank
VDN Override for ISDN Trunk ASAI Messages
When Meet-me Conferencing is n, an asterisk (*) appears next to the field name, indicating
that this field follows VDN override rules when the system changes the "active" VDN for a
call.This field appears only if the following conditions are set on the Communication Manager
license file:
On the System-Parameters Customer-Options screen, the ASAI Link Core
●
Capabilities field is y.
On the System-Parameters Customer-Options screen, the G3 Version field is set to
●
V10 or later
Additionally, you can set this field to y only when the Allow VDN Override field on this screen is
also set to y. When Meet-me Conferencing is n, an asterisk (*) appears next to the field name,
indicating that this field follows VDN override rules when the system changes the "active" VDN
for a call.
Valid entries
y
n
1702 Administrator Guide for Avaya Communication Manager
Usage
Enter the VDN extension number to which an incoming trunk call will be
routed if it returns to vector processing after the agent drops the call.
Usage
When an incoming call routes, the "Called Number" information sent in
the "Call Offered," "Altering," "Queued," and "Connect" ASAI events and
the "Adjunct Route Request" ASAI message, is the "active VDN"
extension associated with the routed call.
The "Called Number" information sent for the ASAI event notification and
adjunct-request messages does not change for a ISDN-PRI trunk. It is
always the number in the Called Number IE sent in the incoming ISDN
call's SETUP message.