Avaya Communication Manager Administrator's Manual page 1604

Screen Reference
Valid entries
14
15
18
23
Dial Access
This field controls whether users can route outgoing calls through an outgoing or two-way trunk
group by dialing its trunk access code. Allowing dial access does not interfere with the operation
of AAR/ARS.
!
SECURITY ALERT:
Calls dialed with a trunk access code over WATS trunks bypass AAR/ARS and
SECURITY ALERT:
aren't restricted by facility restriction levels. For security, you might want to leave
the field set to n unless you need dial access to test the trunk group.
Valid entries
y
n
Digit Absorption List
This field assigns a digit absorption list, when used, to a trunk group that terminates at a
step-by-step central office.
Valid entries
0 to 4 or blank
1604 Administrator Guide for Avaya Communication Manager
Usage
If the Country field is 14 and the Group Type is DID or DIOD, the CO
Type field appears.
If the Country field is 15, Communication Manager is administered for
Public Network Call Priority (Intrusion and Re-ring). Also, the Protocol
Type field appears for Group Type DID or DIOD.
If the Country field is 18, Avaya Communication Manager can be
administered for Public Network Call Priority (Mode of Release Control,
Forced Disconnect, and Re-ring).
If the Country field is 23 and Group Type field is either CO or DID,
Communication Manager is administered for Block Collect Calls.
Usage
Allows users to access the trunk group by dialing its access code.
Does not allow users to access the trunk group by dialing its access code.
Attendants can still select this trunk group with a Trunk Group Select
button.
Usage
Enter the number of the digit absorption list this trunk group should use.
2 of 2