Avaya Communication Manager Administrator's Manual page 1535

Flexible Billing
Provides an internationally accepted standard interface for end-to-end digital connectivity. Used
with a T1 interface and supports twenty-three 64-KBPS voice or data B-Channels and one
64-Kbps signaling D Channel for total bandwidth of 1.544 Mbps.
Forced Entry of Account Codes
Allows system administration to force account users to enter account codes based on user or
trunk class of restriction, or by an option on the Toll Analysis table. FEAC provides an easy
method of allocating the costs of specific calls to the correct project, department, etc.
Global Call Classification
Provides call classification outside of North America. Listens for tones and classifies tones
detected. Required for Call Coverage Off Net and Outgoing Call Management.
Hospitality (Basic)
Provides access to basic features including: Attendant Crisis Alert, Attendant Room Status,
Automatic Wakeup, Custom Selection of VIP DID Numbers, Do Not Disturb, Names
Registration, Single-Digit Dialing, and Mixed Station Numbering.
Hospitality (G3V3 Enhancements)
Software required for Property Management System and Automatic Wakeup. Property
Management System Interface activates Forward PMS Messages to INTUITY Lodging and
PMS Protocol Mode (transmit in ASCII mode). Cannot be set to y if the Hospitality (Basic) field
is n.
Note:
Standard hospitality features are included in basic system software.
Note:
Internet Protocol (IP) PNC
This field is only for the Avaya S8700 Series IP-Connect-only port network connections and
only then should be set to y. If the configuration calls for fiber-connected only PNs, or if it
includes some port networks that are connected together with fiber and some port networks that
are IP-connect, this field should be set to n. This field cannot be set to y if:
the Asynch. Transfer Mode (ATM) PNC field is y
●
the PNC Duplication field is y
●
If fiber is administered
●
System-Parameters Customer-Options
Issue 2.1 May 2006 1535