Avaya Communication Manager Administrator's Manual page 1071

PMS Log Endpoint
Valid entries
Valid extension
PMS
blank
PMS Protocol Mode
Valid entries
normal
transparent
Seconds Before PMS Link Idle Timeout
Valid entries
5 to 20
Take Down Link for Lost Messages
Valid entries
y/n
Usage
Enter the data extension number the server dials to access PMS. Cannot
be a VDN extension.
Use this value if the PMS is connected over a TCP/IP link, and this link is
defined as PMS on the IP Services screen.
Usage
Indicate the message protocol mode used between the server and PMS.
Coordinate this option with your PMS vendor.
Usage
Enter the idle time in seconds that the server waits for an
acknowledgment from the PMS before the server enters link failure mode
from the PMS transmission link.
Usage
Enter y to cause the PMS link to come down if messages are being lost.
Monitor your PMS error log if you use n.
Hospitality
Issue 2.1 May 2006 1071