Avaya Communication Manager Administrator's Manual page 1055

Note:
This field is for a DCP bridged appearance LED color and flash rate when a call
Note:
on a bridged appearance is put on hold by another party on the DCP bridged
appearance. Additionally, this field only applies to 8400 and 6400 series
telephones. The 2400 series phone uses icons rather then LEDs. Correct
operation in the Japanese environment requires the administrator to select the
values red and flash for this field.
Valid entries
green or red
off
wink
inverse-wink
flash
flutter
broken-flutter
steady
Other Stations When Call Is Active
Use this field to control a DCP bridged appearance LED for those non-active parties with a
bridged appearance that is active. The default value is green.
Note:
This field only applies to 8400 and 6400 series telephones. The 2400 series
Note:
phone uses ICONs rather then LEDs. Correct operation in the Japanese
environment requires the administrator to select the value red for this field.
Valid entries
green or red
Usage
Indicate the color of the LED. Default is green.
Select the flash rate for the LED. Default is wink.
Usage
Select the LED color. Default is green.
Feature-Related System Parameters
Issue 2.1 May 2006 1055