Avaya Communication Manager Administrator's Manual page 1145

If there is only one IP interface within a priority, the Target socket load and Warning level field
is no longer used for load balancing. You can still enter a value in this field to receive an error or
a warning alarm if the targeted value is exceeded.
Note:
The 4606, 4612, and 4624 telephones do not support the load balancing feature
Note:
of the TN2602AP circuit pack.
Valid entries
1 to 499
Type
Identifies the type of IP interface.
Valid entries
clan
VAL
medpro
procr
Virtual MAC Address
This field appears when Critical Reliable Bearer is y.
Valid entries
12 alpha-numeric
characters
Usage
Enter the maximum number of sockets targeted for this interface. If the
number of sockets exceeds the targeted number, a warning alarm is
generated.The default is 400.
Usage
This field is auto-populated based on the slot location specified in the
command line.
Usage
Display-only. The Virtual MAC address that is shared by duplicated
TN2602AP circuit packs. Automatically populated based on the Virtual
MAC address table.
Note: The 4606, 4612, and 4624 telephones do not support the bearer
duplication feature of the TN2602AP circuit pack. If these telephones are
used while an interchange from active to standby media processor is in
process, calls might be dropped.
IP Interfaces
Issue 2.1 May 2006 1145