Avaya Communication Manager Administrator's Manual page 1462

Screen Reference
Message Waiting Indicator
This field appears only for ISDN-BRI data modules and for 500, 2500, K2500, 7104A, 6210,
6218, 6220, 8110, H.323 and VRU telephones. (This field is independent of the administration
of the Caller ID Message Waiting Indication for CallrID telephones.) Must be set to a value other
than none when the Type field is set to H.323.
Valid entries
led
neon
none
MIM Mtce/Mgt
Indicates if the telephone supports MIM Maintenance and Management capabilities other then
endpoint initialization. Appears only if MIM Support is y.
MIM Support (Management Information Message Support)
This field appears only for ISDN-BRI data modules and ASAI. This field supports MIM endpoint
initialization (SPID support) and other Maintenance or Management capabilities.
Valid entries
y
n
1462 Administrator Guide for Avaya Communication Manager
Usage
Enter led if the message waiting indicator is a light-emitting diode (LED).
Enter neon if the message waiting indicator is a neon indicator.
Note: The neon message waiting indicator is supported only on a small
subset of boards, including older US-only boards, such as the TN746 and
the TN793. When you select this option, the following warning appears:
"WARNING: neon requires specific hardware/admin support." Check the
documentation for your board to see if neon is supported. Note that this
option is only available if Analog Ringing Cadence on the Location
Parameters screen is set to 1 (US).
No message waiting indicator is selected. This is the default.
Usage
Enter y to display Endpt Init and MIM Mtce/Mgt.
Enter n for ASAI.