Enable Slb Gogo-Mode Service-Check - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

enable slb gogo-mode service-check

enable slb gogo-mode <port number> service-check [all | ftp | http | nntp |
pop3 | smtp | telnet | <TCP port number>]
Description
Enables layer 7 service checking for the GoGo mode group.
Syntax Description
port number
all
ftp
http
nntp
pop3
smtp
telnet
TCP port number
Default
GoGo mode service check is disabled by default.
Usage Guidelines
To disable service-check for a GoGo mode group, use the following command:
disable slb gogo-mode service-check
Example
The following command enables GoGo mode FTP service-check for the group with port 29 as the master
port:
enable slb gogo-mode 29 service-check ftp
History
This command was first available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all "i" series platforms.
614
Specifies the GoGo mode master port.
Specifies all service checks.
Specifies the FTP service check.
Specifies the HTTP service check.
Specifies the NNTP service check.
Specifies the POP3 service check.
Specifies the SMTP service check.
Specifies the telnet service check.
Specifies the TCP port, instead of the service.
ExtremeWare 7.5 Command Reference Guide