Enable Web Https Access-Profile - Extreme Networks ExtremeWare Command Reference Manual

enable web https access-profile

enable web https access-profile [none | <access-profile>] port <port
number>
Description
Allows HTTPS access on the specified (non-default) port.
Syntax Description
none
access-profile
port number
Default
N/A.
Usage Guidelines
Use this command to set up an access profile for a particular port number to restrict HTTPS usage.
Example
The following example enables HTTPS access using the access-profile named secure_web on port 120:
enable web https access-profile secure_web port 120
History
This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies to not to use an access-profile when accessing HTTPS.
Specifies the name of an access-profile to use when accessing HTTPS.
Specifies the port number to use to access HTTPS.
enable web https access-profile
913