Enable Web - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

enable web

enable web {access-profile [<access_profile> | none]} {port
<tcp_port_number>}
Description
Enables ExtremeWare Vista web access to the switch.
Syntax Description
access profile
none
port
Default
Disabled, using TCP port 80.
Usage Guidelines
By default, web access is disabled on the switch (for ExtremeWare versions previous to 6.2.2 build 18,
the default was enabled).
For version 6.0 and higher:
• By default, web access has no access profile and uses TCP port number 80.
• Use an access profile to restrict ExtremeWare Vista web access. An access profile permits or denies a
named list of IP addresses and subnet masks. You must create and configure an access profile before
you can use this option. You create an access profile using the
You configure an access profile using the
profile only when ExtremeWare Vista is enabled.
• Use the option to cancel a previously configured access-profile.
none
• Use the option to specify a TCP port number.
port
Example
The following command applies the access profile administrators to the web:
enable web access-profile administrators
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.0 to include the access profile and port options.
Platform Availability
This command is available on all platforms.
132
Specifies an access profile. (6.0, 6.1)
Cancels a previously configured access profile. (6.0, 6.1)
Specifies a TCP port number. (6.0, 6.1)
config access-profile
create access-profile
command. Apply an access
ExtremeWare Software 7.0.0 Command Reference Guide
command.