File System Commands - D-Link DGS-510 Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide

29. File System Commands

29-1 cd
This command is used to change the current directory.
cd [DIRECTORY-URL]
Parameters
DIRECTORY-URL
Default
The default current directory is the root directory on the file system of the local FLASH.
Command Mode
EXEC Mode.
Command Default Level
Level: 1.
Usage Guideline
If the URL is not specified, then the current directory is not changed.
Example
This example shows how to change the current directory to the directory "log" on file system "c:/".
Switch# dir
Directory of /c:
1 d
2 d
3 d
4 -
20578304 bytes total (3104544 bytes free)
Switch#cd c:/log
Switch#dir
Directory of /c:/log
No files in directory
20578304 bytes total (3104544 bytes free)
Switch#
This example shows how to display the current directory.
Switch# cd
Current directory is /c:/log
Switch#
Specifies the URL of the directory. If not specified, the current
directory will be shown.
0 Dec 29 2013 17:49:36
0 Jan 02 2013 18:42:53
0 Jan 02 2013 18:42:53
639 Jan 03 2013 12:09:32
images
configurations
log
new_config.cfg
255