File System Commands - D-Link Dis-200G Series Cli Reference Manual

12. File System Commands

12-1 delete
This command is used to delete a file.
delete FILE-URL
Parameters
FILE-URL
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
The firmware image or the default configuration file cannot be deleted.
Example
This example shows how to delete the file named "office.cfg" from file system on the local flash.
Switch# delete flash:office.cfg
12-2 dir
This command is used to display the information for files in the flash.
dir
Parameters
none
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1.
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Specifies the name of the file in flash. Sytax: <flash:filename>.
59