Network (Dhcp Pool Config); Bootfile; Domain-Name - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference

network (DHCP Pool Config)

Use this command to configure the subnet number and mask for a DHCP address pool on the
server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool.
The prefix-length is an integer from 0 to 32.
Default
Format
Mode
no network
This command removes the subnet number and mask.
Format
Mode

bootfile

The command specifies the name of the default boot image for a DHCP client. The
<filename>
Format
Mode
no bootfile
This command deletes the boot image name.
Format
Mode

domain-name

This command specifies the domain name for a DHCP client. The
domain name string of the client.
Default
Format
Mode
no domain-name
This command removes the domain name.
Format
Mode
284 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
none
network <networknumber> [{<mask> | <prefixlength>}]
DHCP Pool Config
no network
DHCP Pool Config
specifies the boot image file.
bootfile <filename>
DHCP Pool Config
no bootfile
DHCP Pool Config
none
domain-name <domain>
DHCP Pool Config
no domain-name
DHCP Pool Config
specifies the
<domain>