Interface Types; View Basic Interface Information - Dell S6100 Configuration Manual

• Null Interfaces
• Port Channel Interfaces
• Bulk Configuration
• Defining Interface Range Macros
• Monitoring and Maintaining Interfaces
• Split 40G Ports on a 16X40G QSFP+ Module
• Splitting 100G Ports
• Link Dampening
• Link Bundle Monitoring
• Using Ethernet Pause Frames for Flow Control
• Configure the MTU Size on an Interface
• Port-Pipes
• CR4 Auto-Negotiation
• FEC Configuration
• Setting the Speed of Ethernet Interfaces
• Adjusting the Keepalive Timer
• View Advanced Interface Information
• Configuring the Traffic Sampling Size Globally
• Dynamic Counters
• Enhanced Validation of Interface Ranges
• Compressing Configuration Files

Interface Types

The following table describes different interface types.
Table 37. Different Types of Interfaces
Interface Type
Physical
Management
Loopback
Null
Port Channel
VLAN

View Basic Interface Information

To view basic interface information, use the following command.
You have several options for viewing interface status and configuration parameters.
• Lists all configurable interfaces on the chassis.
EXEC mode
show interfaces
Modes Possible
L2, L3
N/A
L3
N/A
L2, L3
L2, L3
Default Mode
Unset
N/A
L3
N/A
L3
L2
Requires Creation
No
No
Yes
No
Yes
Yes (except default)
Default State
Shutdown (disabled)
No Shutdown (enabled)
No Shutdown (enabled)
Enabled
Shutdown (disabled)
L2 - Shutdown (disabled)
L3 - No Shutdown
(enabled)
Interfaces 373