Dhcpv6 Pool Summary - Dell PowerConnect 6224 User Manual

Prefer Lifetime — Specifies the prefer lifetime in seconds for delegated prefix.
•
• Delete — Deletes the displayed pool prefix delegation configuration when checked and Apply
Changes is clicked.
Configuring a delegated prefix to a Pool
1. Open the Prefix Delegation Configuration page.
2. Select the pool to be configured.
3. Specify the delegated prefix.
4. Modify the remaining fields as needed.
5. Click Apply Changes.
The delegated prefix and parameters are saved, and the device is updated.
Configuring a delegated prefix Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• DHCPv6 Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-8. DHCPv6 Prefix Delegation Command
CLI Command
prefix-delegation

DHCPv6 Pool Summary

Use the Pool Summary page to display settings for all DHCPv6 Pools. At least one pool must be created
using DHCPv6 Pool Configuration before the Pool Summary displays.
To display the page, click IPv6 → DHCPv6 → Pool Summary in the tree view.
Description
Defines Multiple IPv6 prefixes within a pool for distributing to specific
DHCPv6 Prefix delegation clients.
629
Configuring IPv6