Active Images - Dell PowerConnect 5548P System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

Active Images

There are two firmware images, Image1 and Image2, stored on the switch.
One of these images is identified as the active image, and the other is
identified as the inactive image. The switch boots from the active image.
You can switch the inactive image to the active image, and then reboot the
switch.
The active image file for each unit in the stack can be individually selected.
To select the image file to be used after reset:
1 Click System > File Management > Active Images in the tree view to
display the Active Images page.
Figure 9-59. Active Images
The following fields are displayed:
– Unit ID — ID of the unit.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSystemConfig.fm
Dell PowerConnect 55xx Systems User Guide
361