Defining Authentication Profiles - Dell PowerConnect 3324 User Manual

The following is an example of the CLI commands:
Console (config)# management access-list mlist
Console (config-macl)# permit ethernet 1/e1
Console (config-macl)# permit ethernet 2/e9
Console (config-macl)# deny ethernet 1/e2
Console (config-macl)# deny ethernet 2/e10
Console (config-macl)# exit
Console (config)# management access-class mlist
Console (config)# exit
Console# show management access-list
mlist
-----
permit ethernet 1/e1
permit ethernet 2/e9
! (Note: all other access implicitly denied)
Console> show management access-class
Management access-class is enabled, using access list mlist

Defining Authentication Profiles

The Authentication Profiles page allows network managers to select the user authentication method on the device. User authentication occurs:
Locally
l
Via an external server
l
User authentication can also be set to None.