INVT Goodrive350 Series Operation Manual page 52

Goodrive350 IP55 High-ingress Protection Series VFD
Level 1
System
settings
5.4.2 Editing list
The parameters in the parameter list in stopped state can be added as needed (through the
menu of user defined home parameters), and the list can also be edited such as "Move up",
"Move down", "Delete from the list", and "Restore default". The edit function is shown in the
following.
16:02:35 Fwd Local Ready
Stopped-state parameters
Running-state parameters
Back Home
Press
key or
(parameter list), the returned list is the list edited. If
interface without selecting an edit operation, it will return to the previous menu (parameter list
remain unchanged).
Note: For the parameter objects in the list header, move-up operation will be invalid,
and the same principle can be applied to the parameter objects in the list footer; after
deleting a certain parameter, the parameter objects under it will be moved up
automatically.
The items in the parameter list in running state can be added as needed (through the menu of
user defined home parameters), and the list can also be edited such as "Place top", "Move up",
"Move down", "Delete from the list", and "Restore default parameters". The edit function is
shown in the interface below.
Level 2
/ /
Figure 5-10 Editing list 1
GD350 16:02:35
P17.00: Set Freq
P17.11: DC Bus Volt
P17.12: DigiInputTrmlState
P17.13: DigiOutputTrmlState
P17.26: Current Oper Time
P17.15: Motor Trq Ref
Sele
key to enter edit interface, select the operation needed, and press
key to confirm the edit operation and return to the previous menu
Level 3
Fwd GD350
Local Ready
Back Edit OK
-34-
Basic operation guidelines
Level 4
Language
Time/date
Backlight brightness
Backlight time
Enable power-on setup
wizard
Power-on setup wizard
Keypad burning selection
Enable fault time
Control board burning
selection
Up/down key sensitivity
16:02:35 Fwd
Local
Place top
Move up
Move down
Delete from the list
Restore default
Back Home
key or key is pressed in edit
GD350
Ready
Sele
key,