INVT Goodrive350 Series Operation Manual page 229

Goodrive350 IP55 High-ingress Protection Series VFD
Function
Name
code
P16.40 Received PZD10 corresponds to 100.0% of the motor rated
P16.41 Received PZD11
P16.42 Received PZD12
P16.43 Sent PZD2
P16.44 Sent PZD3
P16.45 Sent PZD4
Description
current)
5: Setting of the upper limit of forward running
frequency (0–Fmax, unit: 0.01 Hz)
6: Setting of the upper limit of reverse running
frequency (0–Fmax, unit: 0.01 Hz)
7: Upper limit of the electromotive torque (0–
3000, in which 1000 corresponds to 100.0% of
the motor rated current)
8: Upper limit of braking torque (0–3000, in
which 1000 corresponds to 100% of the motor
rated current)
9. Virtual input terminal command (range:
0x000–0x3FF,
S8/S7/S6/S5/HDIB/ HDIA/S4/S3/S2/S1）
10: Virtual output terminal command (range:
0x00–0x0F,
RO2/RO1/HDO/Y1)
11: Voltage setting (special for V/F separation)
(0–1000, in which 1000 corresponds to 100% of
the motor rated voltage)
12: AO1 output setting 1 (-1000–+1000, in
which 1000 corresponds to 100.0%)
13: AO2 output setting 2 (-1000–+1000, in
which 1000 corresponds to 100.0%)
14: MSB of position reference (signed)
15: LSB of position reference (unsigned)
16: MSB of position feedback (signed)
17: LSB of position feedback (unsigned)
18: Position feedback setting flag (position
feedback can be set only after this flag is set to
1 and then to 0)
19: Function parameter mapping (PZD2–
PZD12 correspond to P14.49–P14.59)
20–31: Reserved
0–31
0: Invalid
1: Running frequency (×100, Hz)
-211-
corresponding
corresponding
Function parameter list
Default Modify
○
0
○
0
to
to
0 ○
○
0
○
0
○
0