Goodrive350 IP55 High-ingress Protection Series VFD
Group P10—Simple PLC and multi-step speed control
Function
Name
code
P10.00
Simple PLC mode
Simple PLC
P10.01
memory selection
P10.02
Multi-step speed 0 Frequency setting range for steps from step 0
Running time of
P10.03
step 0
P10.04
Multi-step speed 1
Running time of
P10.05
step 1
P10.06
Multi-step speed 2
Running time of
P10.07
step 2
P10.08
Multi-step speed 3
Running time of
P10.09
step 3
P10.10
Multi-step speed 4
Running time of
P10.11
step 4
P10.12
Multi-step speed 5
Running time of
P10.13
step 5
P10.14
Multi-step speed 6
Running time of
P10.15
step 6
P10.16
Multi-step speed 7
Description
0: Stop after running once
The VFD stops automatically after running for
one cycle, and it can be started only after
receiving the running command.
1: Keep running with the final value after
running once
The VFD keeps the running frequency and
direction of the last section after a single cycle.
2: Cyclic running
The VFD enters the next cycle after completing
one cycle until receiving the stop command.
0: Do not memorize at power outage
1: Memorize at power outage. The PLC
memories its running stage and running
frequency before power-off.
to
step
15:
corresponds to the max. output frequency
P00.03.
Running time setting range for steps from step
0 to step 15: 0.0–6553.5s(min). The time unit is
specified by P10.37.
When simple PLC operation is selected, it is
required to set
P10.02–P10.33
running frequency and running time of each
step.
Note:
The
symbol
determines the running direction of simple PLC,
and the negative value means reverse running.
Deceleration time
(two sections)
P10.04
P10.02
Acceleration time
(two sections)
P10.03
P10.05
P10.07
When selecting multi-step speed running, the
multi-step speed is within the range of -fmax–
-186-
-300.0–100.0%.
300.0%
to determine the
of
multi-step
P10.28
P10.30
P10.06
P10.31
P10.33
Function parameter list
Default Modify
0
0
0.0%
0.0s
0.0%
0.0s
0.0%
0.0s
0.0%
0.0s
speed
0.0%
0.0s
0.0%
P10.32
0.0s
0.0%
0.0s
0.0%
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Need help?
Do you have a question about the Goodrive350 Series and is the answer not in the manual?
Questions and answers