INVT Goodrive350 Series Operation Manual page 42

Goodrive350 IP55 High-ingress Protection Series VFD
5.1 What this chapter contains
This chapter instructs you how to use the VFD keypad and commission the VFD common
functions.
5.2 Keypad introduction
The VFD has been equipped with a LCD keypad as a standard configuration part. You can use
the keypad to control the start and stop, read status data, and set parameters of the VFD.
Note:

The LCD keypad is equipped with a real-time clock, which can run properly after being
installed with batteries even if the power line is disconnected. The clock battery (type:
CR2032) is user purchased.

The LCD keypad has the parameter copying function.

The VFDs of the following power ranges must use flat ribbon cables, while for VFDs of
other power ranges, both flat and standard keypad cables are acceptable.
Name
Flat keypad cable
5 Basic operation guidelines
Figure 5-1 Keypad
Length (m)
1
2
3
5
-24-
Basic operation guidelines
Ordering code
67004-00053
67004-00010
67004-00013
67004-00052
Applied to
18.5–37kW