INVT Goodrive350 Series Operation Manual page 387

Goodrive350 IP55 High-ingress Protection Series VFD
See section 3.6 "Product ratings".
Current
Power limit 1.5 times of the motor rated power
Field-weakeni
10–400Hz
ng point
Carrier
4, 8, 12, or 15kHz
frequency
B.4.1 EMC compatibility and motor cable length
To meet the requirements of the EU EMC Directive (2014/30/EU), the maximum length of
motor cables for the -AS model is as follows:
Environment category II (C3)
You can learn the maximum length of the motor cable through the running parameters of the
VFD. To understand the accurate maximum cable length for using an external EMC filter,
contact the local INVT office.
For details about the environment categories, see section B.6 "EMC regulations".
B.5 Application standards
The following table describes the standards that VFDs comply with.
EN/ISO 13849-1
IEC/EN 60204-1
IEC/EN 62061
IEC/EN 61800-3
IEC/EN 61800-5-1
IEC/EN 61800-5-2
GB/T 30844.1
GB/T 30844.2
GB/T 30844.3
All models
Safety of machinery—Safety-related parts of control systems—Part 1:
General principles for design
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements
Safety of machinery—Safety-related functional safety of electrical,
electronic, and programmable electronic control systems
Adjustable speed electrical power drive systems. Part 3: EMC requirements
and specific test methods
Adjustable speed electrical power drive systems—Part 5-1: Safety
requirements—Electrical, thermal and energy
Adjustable speed electrical power drive systems—Part 5-2: Safety
requirements—Function
General-purpose variable-frequency adjustable-speed equipment of 1 kV
and lower—Part 1: Technical conditions
General-purpose variable-frequency adjustable-speed equipment of 1 kV
and lower—Part 2: Test methods
General-purpose variable-frequency adjustable-speed equipment of 1 kV
and lower—Part 3: Safety requirements
Maximum motor cable length (m)
-369-
Technical data
30